Omega Lab Plus Pneumatic Micromotor Turbine

Description

Omega Lab Plus Pneumatic Micromotor Turbine

• The lab turbine design is attractive and elegant, making it simple to use and easy to transport.
• Installation is straightforward, and the machine can start working immediately after being connected to the air source.
• The machine head features a dust-proof design that ensures a long service life.
• The machine operates at high speed with minimal fluctuation, making it easy to handle and highly efficient.
• Its ergonomic design provides comfortable and logical operation, facilitating use.

Technology associated with the micromotor turbine:

• Special anti-dust mechanism

The turbine is equipped with a dust-proof system that prevents debris from penetrating the bearings.

• Easy reservoir extraction

Removing the water reservoir is simple and convenient.

It can operate autonomously with its own integrated water reservoir or be connected to the water supply network.

• Water cooling options

The dental lab turbine offers adjustable water cooling options, ranging from small drops to a fine water/air mist. These independent adjustments allow working conditions to be adapted for different materials, from minimizing micro-cracks to rinsing debris during cutting.

Technical specifications of the lab turbine:

• Working air pressure: 0.2-0.4 Mpa;
• Maximum speed: 400,000 rpm;
• Machine air inlet: 8 mm;
• Handpiece connection: quick coupling.

How to use a dental lab pneumatic turbine:

1. Place the machine stably before use and connect it to a suitable air source.
2. Adjust the pressure regulating valve to the air pressure required by the technical parameters.
3. Unscrew the water bottle.
4. Add water to the bottle, put the water bottle in place, turn it, and press upward into the correct position.
5. Connect the turbine via the quick coupling and insert the tip.
6. Turn on the cooling water switch and adjust to the appropriate position.